Mercury Marine VesselView 502 (with link gateway)

VesselView502

From engine information to vessel systems, the Mercury VesselView502’s 5” screen is your information portal for your boat. From engine information to vessel systems, Mercury VesselView allows boaters to display engine information, genset, sounder info and much more.

Mercury's range of VesselView screens can be installed as a new set-up, or to replace existing screens including older Smartcraft displays on Mercury, MerCruiser and MerCruiser Cummins Diesel.

Install Option 1 - Under Dash - Engines with junction boxes or twin/trip/quad engines (most engines have this set up unless they have analogue gauges)

Refer to all safety items and warnings and follow in full to the install manual before attempting. Locate your junction box under the dash (usually boats with digital gauges have existing). Locate a spare port and plug in the VV Mobile kit (if there are no spare ports, remove a dust cap). IIf you have multiple engines with mechanical shift you will need to contact us for options.

Install Option 2 - Add a junction box under your dash

Refer to all safety items and warnings and follow in full to the install manual before attempting. Locate the two rectangular plugs connected to each other near your gauges/key switch or remote control (throttle and shift). Unplug the two plugs from each other and reconnect them to your new junction box using the optional female/female adaptor. Connect the engine gateway to the junction box also. You can add a dust cap to the remaining 4th port on the junction box to avoid water/dust penetration.

Install Option 3 - Add a new data harness direct to your engine

Locate above plug on your engine, install new data harness from engine to dash, connect gateway to data cable using male/male adapter. This method is not recommended.